Nanotech Waterproofing Products for Substrates. waterproofing line relies on a full range of technologies to waterproof new construction and resolve durability issues in existing structures. Water infiltration, humidity and condensation can damage your home, decreasing its value and the quality of your lifestyle. Liquid coating, hygroscopic resins, cement resins, bentonite technology.These products can be used to safely and ecologically waterproofing underground buildings, balconies, slabs and every kind of structure.
- Kerakoll Aquastop Nanoflex®
Certified, eco-friendly, breathable, anti-alkali and chlorine-resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives, ideal for use in GreenBuilding. Single-component with low CO2 emissions and very low volatile organic compound emissions. Recyclable as an inert material at the end of its life.
Aquastop Nanoflex® develops a smooth, fluid mixture that can be adjusted by varying the amount of water in order to obtain optimal workability for the particular site conditions, guaranteeing maximum adhesion of the bonded system.
- Kerakoll Nanodefense®
Certified, eco-friendly, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments, ideal for use in GreenBuilding. Single-component with very low volatile organic compound emissions. Safeguards the health of both operators and the environment.
Nanodefense® Eco develops total water-resistance under positive thrust guaranteeing the protection of absorbent substrates or those subject to damp, or in constantly humid environments.
- Kerakoll Nanosil Eco
Eco-friendly neutral silane sealant for waterproof sealing of hydraulic and electric systems, through elements and construction elements in pools and in AquaExpert systems, ideal for Greenbuilding. It has reduced solvent content. Safeguards the health of both operators and the environment.
Nanosil Eco develops a high level of adhesion and permanent elasticity on absorbent and non-absorbent surfaces, guaranteeing the waterproofing of system passages even in the most critical space situations.
- Kerakoll Aquastop Green
Anti-cracking waterproof membrane with high adhesion for balconies, terraces and horizontal surfaces before laying ceramic tiles or natural stone; creates a waterproof surface even when overlaid on substrates that are cracked, have not been perfectly cured or might contain vapour pressure due to residual substrate moisture content.
Aquastop Green revolutionises the world of underlying waterproofing, re-writing performance standards to allow applications that are impossible for mineral products.
- Kerakoll Aquastop Eco Nanofix
Certified, eco-friendly, mineral sealant for water-resistant, high-adhesion sealing, ideal for use in GreenBuilding. Single-component with very low volatile organic compound emissions. Recyclable as an inert material at the end of its life.
Aquastop Eco Nanofix develops a fine mixture of extended workability and totally water repellent, guaranteeing the water-resistant adhesion of AquaExpert components and accessories.
- Kerakoll Aquastop 70
140 mm non-woven polypropylene tape with high-adhesion, alkali-resistant waterproof treatment for perimeter joints in the AquaExpert 1 system, to be applied with Nanoflex® Eco.
Aquastop 70 seals perimeter joints quickly guaranteeing waterproofing and durability over time.
- Kerakoll Aquastop 100
Polyethylene, waterproof elastic tape coated on both sides with high-adhesion non-woven polypropylene for perimeter, fractionizing-expansion joints in the AquaExpert 2 system and to seal perimeter joints and between adjacent sheets in the AquaExpert 3 system.
Aquastop 100, practical and quick-to-apply, guarantees continuous waterproofing even at expansion joints.
- Kerakoll Aquastop Flex
Certified, eco-friendly, two-component, anti-alkali and chlorine-resistant, mineral membrane for flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives, ideal for use in GreenBuilding – Part A. Low CO2 emissions and very low volatile organic compound emissions, recyclable as an inert material at the end of its life.
Aquastop Flex creates a water-resistant layer on balconies, terraces, swimming pools and shower cabinets before laying ceramic tiles, even over existing coverings, doing away with the need for costly demolition work.
- Kerakoll Aquastop Flangia
Elastic NBR seal for pipes and drains, to be used prior to laying of ceramic, porcelain tiles and natural stone. Bonds directly on application.
Aquastop Flangia ensures continuous waterproofing even at drain outlets and around through elements.
- Kerakoll Idrobuild Reno 4 - 9 - 15
Decoupling panel in synthetic fibre for the thermal and acoustic insulation, and reduction of transmitted impact noise, to be laid with a thin layer of adhesives from the H40® Eco range.
Suitable for creating floor and wall systems for the subsequent laying of all types of ceramic and porcelain tiles, large slabs, clinker and natural stone. For internal use.
- Kerakoll Idrobuild Tex
Reinforced anti-cracking sheet. Suitable to even out tensile and sheer movements between the substrate and the surface finish. Also suitable for use as an anti-cracking product for tongue-and-groove hardwood floors on critical substrates. For internal floors.
For subsequent laying of ceramic tiles of all kinds, large formats, porcelain tiles, clinker and natural stone, using adhesives from the H40® Eco range.
- Kerakoll Aquastop AR1
Special reinforcing mesh made of alkali-resistant glass fibre to strengthen the eco-friendly Nanoflex® Eco membrane in the AquaExpert 2 system.
- Kerakoll Aquastop BT
Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bituminous sheath, PVC, wood, polycarbonate, glass, plastic or metal materials in AquaExpert systems.
- Kerakoll Aquaform D
Grey-painted aluminium edging trim with 67 mm fully exposed surface and 12 mm tile cover trim, including anchoring tab to secure it below tiles, for use with AquaExpert system. Featuring special parts such as Aquaform DC outer corner and Aquaform DL edging trim connecting piece.
- Kerakoll Aquaform OD
High quality ASA perimeter drain with seamless wall-floor sides coated in non-woven polypropylene to guarantee a good seal with eco-friendly Aquastop Nanoflex® membrane, using eco-friendly adhesives from the H40® Eco range in AquaExpert systems.
- Kerakoll Aquaform Out Kit
Assembly kits for Aquaform VD and Aquaform SD drains to be used as an accessory in AquaExpert systems, formed by a drain extension with polypropylene fabric-coated flange for a perfect seal with Aquastop Nanoflex®, and grille support with steel grille.
- Kerakoll Aquaform VD
180 mm polypropylene central vertical flow drain with 70 mm diameter outlet, no siphon, to be used as an accessory together with the Aquaform Out Kit in AquaExpert systems
- Kerakoll Aquaform SD
75 mm polypropylene central lateral flow drain with 50 mm diameter outlet, no siphon, to be used as an accessory together with the Aquaform Out Kit in AquaExpert systems.
- Kerakoll Aquastop 120
Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems. For use under ceramic and porcelain tiles and natural stone. Bonds directly on application.
Aquastop 120 ensures continuous waterproofing even at expansion joints.
- Kerakoll Slc Eco PU31
Eco-friendly, organic resin for the consolidation of absorbent substrates and the waterproofing of absorbent mineral or cement-based substrates with high residual humidity, ideal for use in GreenBuilding. Single-component, safeguards the health of the environment.
Slc® Eco PU31 raises the mechanical resistances of inconsistent substrates and waterproofs them to protect hardwood floor from residual humidity, for a 100% safe laying.
- Kerakoll Slc® Eco EP21
Certified, eco-friendly, organic resin for the consolidation of absorbent substrates and the waterproofing of absorbent mineral or cement-based substrates with high residual humidity, ideal for use in GreenBuilding. Two-component, solvent-free and with very low volatile organic compound emissions, safeguards the health of operators.
Slc® Eco EP21 raises the mechanical resistance of inconsistent substrates and waterproofs them to protect hardwood floors from residual humidity, for a 100% eco-friendly safe laying.
- Kerakoll Slc® Eco 3CW
Eco-friendly, organic system to waterproof non-absorbent substrates with a high level of residual humidity, ideal for use in GreenBuilding. Three-component, solvent-free, safeguards the health of operators.
Slc® Eco 3CW guarantees water-resistance to protect hardwood floors from residual humidity for a 100% eco-friendly safe laying on non-absorbent substrates and over old floors.
- Kerakoll Slc® Eco DD
Eco-friendly thinner for consolidants and organic polyurethane waterproofing products, ideal for use in GreenBuilding. Single-component with no environmental hazard rating.
Slc® Eco DD increases the fluidity and penetration of Slc® Eco PU31 for effective strengthening even deep into the substrate. Suitable for diluting solvent-based polyurethane varnishes.
- Kerakoll Quarzo
Eco-friendly, calibrated, controlled granulometry mineral quartz, washed and free of organic impurities, perfectly dry, ideal for use in GreenBuilding.
- Draco Waterproof coatings for concrete and other structures
Our technology helps you find the most suitable solution for avoiding and solving problems with water infiltration and humidity in your building. We offer an advanced range of products for waterproofing concrete so that it does not feel afraid of water anymore. DRACO waterproofers: positive thrust and counter-thrust are not any longer a problem for your foundations, balconies or pools.
- Draco Protective water-repellent treatment
Those products are suitable for protecting and reinforcing building surfaces made of concrete, bricks and natural stones. Our coatings can produce a breathable water-repellent barrier that improves finishing work and durability of the underlying materials.
- Draco Products to stop water infiltration
Those products and systems are suitable for restoring and reinforcing waterproof concrete buildings and masonry with resin injections and quick-setting binders even if your surfaces show water leakage and severe cracks. Our products can solve your problems with water infiltration, extend the life of your building and fully respect the environment.
- Draco Active waterproofing of foundations, foundation pads and sturctures installed below ground
The world’s safest waterproofing based on sodium bentonite. It is based on a patented process for high-density prehydration. RAWMAT HDB is a natural waterproofing solution that ensures superior impermeability and self-healing properties under every condition. RAWMAT HDB is particularly suitable for waterproofing reservoirs, concrete beds, foundations, piling systems and concrete buildings that are frequently in contact with groundwater.
- Draco Waterproofing and wet sealing cold joints
This is a comprehensive range of easy-to-use hygroscopic profiles, coves and waterstops that should be used for sealing construction joints and previous concrete castings. Our catalogue includes profiles based on a sodium bentonite pre-gel, butyl rubber, hygroscopic sealants, PVC waterstops for construction joints and all the materials required for waterproof joints
- Draco Waterproofers for large scale concrete and mortar
Waterproofing additives for large scale concrete, mortar and plaster. This solution is ideal for design concrete mixes of hydraulic structures and masonry exposed to humidity or water pressure. If you add our water-repellent additives to your concrete, it will not fear water anymore. Neither in port areas, nor in strands, nor in the most advanced white concrete beds.