Concrete & Mortar Admixtures

Concrete Repair Materials

Admixtures is a major category of construction division products. Water reducing admixtures , mid range water reducers, water reducing set retarding admixtures and water reducing accelerators minimize the requirement of water needed to mix with concrete. These products also aid in screening and reduce shrinkage.

Air entertaining agents improve the workability of concrete mix, and is used to increase durability of roadways, motorways, bridges, dams, runways.

Accelerators for increasing the early strength of concrete, high range water reducers, retarders and accelerators, masonry admixtures for low slump concrete, stabilizers for stabilizing the concrete mixtures, specialized admixtures, mortar admixtures and fibres to reduce plastic shrinkage in concrete mixtures are also available.

Products

  • Draco Flueco 75

    Premixed mortar, no shrinkage, for anchoring. Used for anchoring all types of machineries and metal or concrete precast elements. For anchoring up to 10 cm.

    Download: Flueco 75

  • Draco Flueco 35

    Premixed mortar, no shrinkage, for anchoring. Used for anchoring all types of machineries and metal or concrete precast elements. For anchoring more than 10 cm.

    Download: FLUECO 35

  • Draco Steel

    Anticorrosive coating for reinforcing bars. Two-component product to be brushed on the reinforcement bars as a specific protection against corrosion.

    Download: DRACO STEEL

  • Draco Flueco 40T

    One component, thixotropic fibre reinforced mortar; low elastic modulus. Polymer-cement product with low elastic modulus, suitable for restoring civil structures and buildings.

  • Draco Flueco 80T

    One component, thixotropic fibre reinforced mortar; no shrinkage for structural repairs. Fibre reinforced mortar, high mechanical resistance, for structural repairs of industrial structures, bridges, galleries etc.
    Apply by “wet” shot Crete or trowel.

    Download: FLUECO 80T

  • Draco Flueco 80 T2

    Two-component thixotropic fibre reinforced mortar; low elastic modulus and no shrinkage for restoring and maintenance. High adhesion mortar, specially formulated for maintenance and restoring in civil and industrial buildings. Application by “wet” shotcrete or trowel

  • Draco Flueco 60

    One component self-levelling mortar. Self-levelling, no shrinkage mortar for maintenance or restoring works on industrial structures, bridges etc.

    Download: Flueco 60

  • Draco Flueco 77 Cable

    Ready to use, no shrinkage injection grout; chloride free. Injection grout for cracks, post-tensioned wires, anchoring bars and bolts in rocks, grounds, galleries etc.

  • Drco Flueco 77/T grouting

    Ready to use , thixotropic injection mortar; chloride free. Thixotropic injection mortar for cracks, post-tensioned wires, anchoring bars and bolts in rocks, grounds, galleries etc.

  • Draco Draco spritz N 50

    Thixotropic fibre reinforced mortar for ” dry ” shotcrete, fast setting time. Ready to use product for “dry” shotcrete; high application rate and high thickness due to fast setting characteristics. Suitable also for closing water seepages.

  • Draco Draco spritz N 50 s

    Thixotropic fibre reinforced mortar, for ” dry ” shotcrete, long setting time. Ready to use product for ” dry ” shotcrete; high application rate an possibility of smooth surface finishing due to the long setting time (60 minutes at 20 C°).