Waterproofing materials consist of one component "osmotic" waterproofing mortars, One component fibre reinforced mortars, two-component fibre reinforced mortars, Fast setting grouts for instant closing water seepages, two-component elastic waterproofing system suitable for the containment of water, under positive and negative thrust, waterproofing compound in bituminous emulsion, Bituminous, rapid-drying technological paints, Natural breathable silicate plasters, superior quality water-based injection fluids, water repellents, etc
One component "osmotic" waterproofing mortar. Used to waterproof walls, foundations, tanks etc. also in presence of negative pressure. Apply by brush or spraying equipment.
...
Two component " osmotic" waterproofing mortar. Used to waterproof walls, foundations, tanks etc. also in presence of negative pressure; high adhesion and better resistance to sun and wind when still wet. Apply by brush or spraying equipment (1mm in two coats).
...
One component fibre reinforced mortar for waterproofing and low thickness Finishing. Used as finishing and waterproofing layer for concrete walls, floors, foundations, etc. Apply by spatula or spraying equipment in 2-3 mm. thicknesses.
...
Two-component fibre reinforced mortar for waterproofing and low thickness Finishing. Used as finishing and waterproofing layer for concrete walls, floors, foundations, etc. Apply by spatula or spraying equipment in 2-3 mm. thicknesses. High adhesion and better resistance to sun and wind when still w...
Two-component polymeric mortar; high flexibility for protection and waterproofing. Particularly suited for flexible coating, finishing and waterproofing of structures subject to micro cracks. Apply by spatula or spraying equipment in 2-3 mm. thicknesses.
...
Fast setting grout for instant closing water seepages also under pressure. Special cement binder for instant closing water filtrations from cracks and holes in concrete and masonry. Ready to use product to be applied only adding water.
...
Technological, two-component elastic waterproofing system suitable for the containment of water, under positive and negative thrust, in monolithic structures in concrete. Ideal for waterproofing non-absorbent substrates such as old flooring. Certified as suitable for the containment of drinking wate...
Technological, waterproofing compound in bituminous emulsion, suitable for waterproofing under positive thrust foundations, exterior foundation walls, roofing slabs and cornices. Waterproof and flexibilizing binder for cement-based, fine-grain concrete used in protective insulation castings.
...
Bituminous, rapid-drying technological paint, suitable for waterproofing and protecting under positive thrust metal, wood and cement structures. Ideal as a primer when laying bituminous coverings. Rustproof, antimould and antibacterial.
...
Technological, cross-woven PES fabric reinforcement suitable for reinforcing cement-based, polymeric and bituminous waterproofing products, cement or gypsum-based levelling and self-levelling products and cement-based adhesives on damaged substrates. It increases elastic properties, compactness and ...
Technological, waterproofing strip in thermoplastic, heat-sealable SEBS, suitable for the creation of high-performance expansion joints in terraces, floors, tanks, channels, tunnels, dams and civil and industrial engineering works. Superior elasticity and resistance to ageing.
...
Superior technology, water-based, anti-salinity impregnating primer and transpiration promoter to treat capillary moisture rising in damp walls. Specific in the SANABUILD® Dehumidifying System to restore masonry structures subject to salt efflorescences.
...
Natural breathable silicate plaster with Microtech Technology, suitable for the dehumidification and restoration of damp walls and the protective plastering of old or newly built walls. The perfect adhesion to traditional materials makes it possible to bring old masonry work and environments back to...
Natural breathable silicate finishing product with Microtech Technology, suitable for the rendering of dehumidifying or old and new plasters. It completes the SANABUILD® Dehumidifying System for the restoration of damp walls thanks to its permanently breathable properties.
...
Envirotech Injection Fluid is a blend of polyoxoaluminium stearate in a synthetic, totally odourless solvent carrier. On injection into masonry the active ingredient reacts with the atmosphere to form a water repellent barrier immediately, halting capillary rise of moisture immediately and allowing ...
A superior quality water-based injection fluid that uses Siloxane as the active ingredient. Remains stable for 6 months after dilution and will achieve complete saturation into the broadest spectrum of alkaline/acidic substrates. Non-flammable, non-corrosive and odourless; making it extremely safe f...
One component solvent - based water repellent. One-component, solvent-based product. Used to waterproof and protect building materials such as concrete, bricks, stones etc. from water, acid rains, anti-thaw salt solutions etc. Preventing the formation of efflorescence. No colours changes in the...
Two-component, water - based, water repellent. Used to waterproof and protect building materials such as concrete, bricks, stones etc. from water, acid rains, anti-thaw salt solutions etc. Preventing the formation of efflorescence. No color changes in the sub grades, U.V. rays resistant. Water based...
Technological, water-repellent, universal compound with water-drop effect to protect absorbent vertical surfaces from water and dirt. High penetration capacity. Does not alter the colour of materials treated. Breathable, self-cleaning.
...
| 
