Industrial flooring products such as Surface premixed hardeners of various bases, fibre reinforced layers, Special cement binders for fast setting floors, Premixed, ready-to-use mortars for fast setting floors, Structural adhesive tiles, natural stones, etc, latex for mortars and concrete, epoxy resins and coatings, mastic for industrial floors' joints, polyurethane sealants, Two-component epoxy coatings etc
Surface premixed hardener quartz based. For industrial concrete floors. Suitable for medium-to-light traffic.
...
Surface premixed hardener corundum based. For industrial concrete floors. Suitable for medium-to-heavy traffic.
...
Surface premixed hardener metal based. For industrial concrete floors. Suitable for heavy traffic.
...
Cement based, fibre reinforced layer for industrial floors. For industrial, high resistance floors. Applied both on just poured concrete basement and on already cured one (using adhesion promoter EPOX RIPRESA) in 1 to 2,5-cm. thicknesses.
...
Cement based, fibre reinforced layer for industrial floors. For industrial, high resistance floors. Applied both on just poured concrete basement and on already cured one (using adhesion promoter EPOX RIPRESA). The product must be used for thickness higher than 2,5 cm.
...
Cement based layer, with metallic hardeners, for industrial floors. For industrial, very high resistance floors. Applied both on just poured concrete basement and on already cured one (using adhesion promoter EPOX RIPRESA) in 1 to 3 cm thickness.
...
Special cement binder for fast setting floors. Mixed with proper aggregates and water, may be walked after 4 -6 hours and tiles may be applied within 24 hours (at 20°C).
...
Premixed, ready-to-use mortar for fast setting floors. After the application it may be walked after 4 -6 hours and tiles may be applied Within 24 hours (at 20°C).
...
Structural adhesive tiles, natural stones, etc. Two-component structural adhesive for tiles, natural or artificial stones etc. Specially suited for the adhesion of large size, high impact and wear resistance industrial tiles.
...
One-component latex for mortars. Synthetic resin (acrylic modified polymer), strongly adhesive, used to improve the characteristics of mortars, plasters, floors etc.
...
One-component latex for concrete multiple concrete pours; adhesion agent for mortars and grouts. Used for for the adhesion of new - to - old concrete, for levelling mortars, to apply new plaster, filling holes and cracks etc.
...
Two-component, transparent, water based epoxy resin. Used for surface sealing, hardening, waterproofing and dust proofing industrial floors. Water based product may be used also for interiors and/or low ventilation applications.
...
Water based, two-component epoxy coating. Chemical resistant epoxy coating for protection of concrete floors and walls; water Based product may be used also for interiors and/or low ventilation applications. High adhesion also in presence of sub grade's humidity. Application by rolls or spray.
...
Two-component, solvent less, epoxy coating for industrial floors. Epoxy solvent less coating for protection of industrial floors from chemical attack; waterproof, antidust, resistant at rolling wear. Solid content 100%.
...
One-component, solvent based, polyurethane coating for industrial floors. Used to protect and waterproof civil and industrial floors; one-component product easy to roll and spray application. Good chemical and rolling wear resistance.
...
Two-component, solventless and self-levelling, epoxy coating, for industrial floors. Three -component epoxy floor, solid content 100%. Used as high chemical resistant, self- levelling coat with 2-4mm. Thickness. Available also in anti-static grade EPOLEVEL GX 18 with low electric resistance.
...
Epoxy-cement mortar for low thickness toppings on floors and concrete structures. Epoxy-cement, two components coating, for surface restoration and maintenance of concrete structures and floors. May be used also in presence of humidity in the sub grade.
...
Solvent free epoxy binder for mortar based high thickness coatings. Epoxy binder for high thickness, chemical and wear resistant coatings mortars. To be mixed with quartz with binder/quartz ratio=1:8-1:10
...
Two-component mastic for industrial floors' joints. Two component epoxy-polyurethane mastic for sealing horizontal joints and cracks in industrial floors. High surface hardness and and resistance to rolling wear, chemicals, oil, lubes etc.
...
Two-component mastic for airports' joints. Two-component epoxy-polyurethane and bitumen mastic for sealing horizontal joints and cracks in airports and floors. Resistance to rolling wear, chemicals, oil, lubes etc. Black colour.
...
One-component polyurethane sealant, tixotropic. One-component polyurethane product with high elasticity for vertical and horizontal joints in walls, floors, precast elements, cladding etc. It may be used also for the adhesion of metal elements.
...
One-component polyurethane sealant, self-levelling. One-component polyurethane product with high elasticity for horizontal joints in airports, parking, floors etc.
...
Two-component epoxy coating, solvent free. Protective coating for concrete structures. Waterproof and resistant to chemicals, salts, oil, lubes etc. To be used for tanks, ducts, reservoirs, cooling towers, piers and other industrial structures.
...
Two-component epoxy coating, solvent free, food grade. Waterproof and resistant to chemicals, salts, oils etc. To be used for coating structures in contact or containing foods or drinking liquids. Tanks, ducts, reservoirs, cooling towers, piers and other industrial structures.
...
Two-component epoxy - tar coating. Protective, high adhesion coating for concrete structures. Used in sewage plants, ducts and pipes, underwater structures, concrete bridges' decks etc. High U.V. rays resistance.
...
| 
